Les enduits, seront traités en 02 c

Les enduits, seront traités en 02 couches, la première sous couche de 1cm d’épaisseur devra être à surface rugueuse accentuée par des stries à la truelle, les enduits ordinaires ne devront pas présenter sous le passage de règle de 3m de long, des flèches de plus de 1cm de profondeur, la deuxième de 0.5 - 1cm d’épaisseur, sera réalisée au mortier à base de sable fin de granulométrie inférieure à 0/3.

Résultats (Anglais) 1:

Coatings, will be treated as 02 layers, the first layer of 1 cm thickness must be rough surface accentuated by streaks on the trowel, ordinary coatings shall not present under the rule of 3 m long passageway, arrows of more than 1 cm deep, the second 0.5 - 1 cm thick, will be carried out with mortar made from fine sand with a particle size less than 0/3.

Résultats (Anglais) 2:

The coatings will be treated as 02 layers, the first layer under 1cm thick rough surface to be accentuated by streaks trowel, ordinary coated should not presented in the passage of 3m long rule, arrows more than 1cm deep, the second 0.5 - 1cm thick, will be carried out based mortar end of size less than 0/3 sand.

Résultats (Anglais) 3:

The coated, will be treated in 02 layers, the first under layer of 1cm thick will need to be to rough surface accentuated by streaks to the trowel, the ordinary coated must not present under the passage of Rule of 3m long, arrows of more than 1cm in depth, the second of 0.5 - 1cm thick,Will be performed at the mortar to sand base end of particle sizes less than 0/3.